Bathing with Electric Geyser: The use of geysers is a common thing in today’s lifestyle, but the danger associated with it is more than the convenience it gives you. If it is not used properly, it can cause big trouble. Let us know some safety tips related to its use in this article.
Taking a bath seems to be the biggest task in the winter season. For this, nowadays you will see the use of geysers in every house.
However, earlier many people used to use rods to heat bathing water, which has now become a thing of the past. Compared to the geyser, the electricity consumption to heat water in the rod was more and it also took more time.
Geysers running on gas and electricity prove to be quite economical in this matter, but in the meantime, there is a risk of a major accident due to a little carelessness. Also, if it is not used properly, it can cause much harm to your health. Let us know how.
Taking a bath with a geyser on can put you in big trouble. Yes, sometimes due to small mistakes in its fitting, it can get damaged, due to which you can also get electrocuted.
Sometimes the automatic heat sensors installed in these stop working, and then your geyser may burst.
If you also often take a bath with the geyser on, then be careful. By doing this, the coil attached to it becomes too hot and increases the possibility of a short circuit.
If you turn on the geyser and take a bath with hot water, it is not at all good for your skin. This can make your skin very dry, causing it to become rough and dry.
The boiling water of the geyser is also not good for the health of your hair. It can make your hair dry and increase dandruff and dryness.
Bathing with hot water by turning on the geyser can also cause damage to the nerves, especially it can trigger problems in the joints.
Therefore, if you want to remain safe and healthy, do not let the habit of bathing by turning on the geyser become a part of your lifestyle, because a geyser is an electronic item.
Electric Geyser Safety Tips
Temperature Setting
Set the geyser thermostat to a safe temperature to prevent scalding. Ideally, it should be around 120°F (49°C).
Regular Maintenance
Schedule annual check-ups to ensure proper functioning and address potential issues.
Pressure Relief Valve
Test the pressure relief valve periodically to prevent excessive pressure buildup, ensuring it releases properly.
Install a Thermostatic Mixing Valve
This helps control water temperature, reducing the risk of burns.
Ventilation
Ensure proper ventilation in the geyser area to prevent gas buildup.
Secure Installation
Mount the geyser securely to the wall to prevent tipping.
Keep Flammable Items Away
Keep combustible materials away from the geyser to avoid fire hazards.
Childproofing
If you have children, consider installing childproof locks to prevent accidental scalding.
Emergency Switch
Know the location of the emergency switch and how to turn off the geyser in case of a malfunction.
Leaks
Regularly check for leaks and address them promptly to prevent water damage.
Carbon Monoxide Detection
If you have a gas geyser, install a carbon monoxide detector nearby for safety.
Professional Installation
Hire a qualified technician for geyser installation to ensure compliance with safety standards.
Remember, prioritizing safety measures helps prevent accidents and ensures the efficient and secure operation of your geyser.
Stay in Touch with Reelmandu.